- Dobro došli na DMR Srbija.
Skorašnje poruke
#1
Ostali uređaji / AnyTone AT-D878UV
Poslednja poruka YT2CQ - Februar 03, 2020, 08:39:34 POSLE PODNEDual-band uredjaj koji podrzava analogni FM, DMR (tier I i II), APRS, DMR Roaming and DPRS.
https://www.va2pv.com/anytone_at-d878uv_dmr_aprs_ht_en
https://www.va2pv.com/anytone_at-d878uv_dmr_aprs_ht_en
#2
Ostali uređaji / Odg: Radioddity GD-77
Poslednja poruka Sova - Novembar 15, 2019, 12:48:06 PRE PODNEIzasao novi FW 4.2.6 uz koji dolazi CPS 3.1.9 B ..
Oznacih ga kao B jer nemam podatak da li je isti kao prethodni . .a nemam podatak ni sta je sredjeno od gresaka u ovoj verziji FW.
FW dolazi arhiviran u fascikli sa oznakom 3.2.6 dok je sam fajl sa oznakom 4.2.6 kao i info u uredjaju nakon flesovanja.
Oznacih ga kao B jer nemam podatak da li je isti kao prethodni . .a nemam podatak ni sta je sredjeno od gresaka u ovoj verziji FW.
FW dolazi arhiviran u fascikli sa oznakom 3.2.6 dok je sam fajl sa oznakom 4.2.6 kao i info u uredjaju nakon flesovanja.
#3
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka YT2CQ - Novembar 03, 2019, 04:16:54 POSLE PODNE1. IP odgovara i ne menja se.
2.Vidim ga na BrandMeister0u da je online.
3. evo logova i kolko vidim nest sa IP i portovima nisam odradio kako treba:
2.Vidim ga na BrandMeister0u da je online.
3. evo logova i kolko vidim nest sa IP i portovima nisam odradio kako treba:
Kod [Izaberi]
M: 2019-11-03 15:14:34.691 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:34.691 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:34.691 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:34.691 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:34.691 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:34.691 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:35.701 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:36.274 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:36.275 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:36.275 DV3000 not found!, aborting.
I: 2019-11-03 15:14:39.437 Analog Bridge Version 1.3 Tue Jul 2 12:44:25 UTC 2019
I: 2019-11-03 15:14:39.438 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:39.438 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:39.438 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:39.438
I: 2019-11-03 15:14:39.439 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:39.439 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:39.439 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:39.440
I: 2019-11-03 15:14:39.440 Analog Bridge is starting
M: 2019-11-03 15:14:39.441 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:39.441 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:39.441 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:39.442 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:39.442 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:39.443 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:39.443 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:39.443 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:39.443 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:39.444 Include file asl.ini not found
M: 2019-11-03 15:14:39.444 Setting [] include -> asl.ini
M: 2019-11-03 15:14:39.445 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:39.445 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:39.445 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:39.445 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:39.445 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:39.446 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:39.446 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:39.446 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:39.449 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:39.449 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:39.449 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:39.450 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:39.450 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:39.450 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:39.451 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:39.451 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:39.451 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:39.452 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:39.452 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:39.452 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:40.462 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:41.042 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:41.042 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:41.043 DV3000 not found!, aborting.
I: 2019-11-03 15:14:44.187 Analog Bridge Version 1.3 Tue Jul 2 12:44:25 UTC 2019
I: 2019-11-03 15:14:44.188 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:44.188 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:44.188 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:44.188
I: 2019-11-03 15:14:44.188 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:44.188 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:44.188 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:44.188
I: 2019-11-03 15:14:44.188 Analog Bridge is starting
M: 2019-11-03 15:14:44.189 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:44.190 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:44.190 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:44.190 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:44.190 Include file asl.ini not found
M: 2019-11-03 15:14:44.190 Setting [] include -> asl.ini
M: 2019-11-03 15:14:44.190 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:44.190 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:44.190 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:44.190 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:44.190 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:44.190 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:44.190 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:44.190 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:44.190 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:44.191 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:44.191 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:44.191 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:44.191 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:44.191 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:44.191 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:44.191 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:44.192 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:44.192 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:44.192 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:44.192 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:44.192 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:45.202 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:45.772 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:45.772 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:45.772 DV3000 not found!, aborting.
I: 2019-11-03 15:14:48.938 Analog Bridge Version 1.3 Tue Jul 2 12:44:25 UTC 2019
I: 2019-11-03 15:14:48.938 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:48.938 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:48.938 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:48.938
I: 2019-11-03 15:14:48.938 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:48.938 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:48.939 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:48.939
I: 2019-11-03 15:14:48.939 Analog Bridge is starting
M: 2019-11-03 15:14:48.939 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:48.939 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:48.940 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:48.940 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:48.940 Include file asl.ini not found
M: 2019-11-03 15:14:48.940 Setting [] include -> asl.ini
M: 2019-11-03 15:14:48.940 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:48.940 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:48.940 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:48.940 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:48.940 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:48.941 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:48.941 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:48.941 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:48.941 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:48.941 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:48.941 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:48.942 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:48.942 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:48.942 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:48.942 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:48.942 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:48.942 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:48.942 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:49.952 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:50.535 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:50.535 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:50.535 DV3000 not found!, aborting.
I: 2019-11-03 15:14:53.687 Analog Bridge Version 1.3 Tue Jul 2 12:44:25 UTC 2019
I: 2019-11-03 15:14:53.688 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:53.688 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:53.688 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:53.688
I: 2019-11-03 15:14:53.688 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:53.688 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:53.688 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:53.688
I: 2019-11-03 15:14:53.688 Analog Bridge is starting
M: 2019-11-03 15:14:53.689 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:53.690 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:53.690 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:53.690 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:53.690 Include file asl.ini not found
M: 2019-11-03 15:14:53.690 Setting [] include -> asl.ini
M: 2019-11-03 15:14:53.690 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:53.690 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:53.690 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:53.690 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:53.690 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:53.690 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:53.690 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:53.690 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:53.690 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:53.691 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:53.691 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:53.691 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:53.691 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:53.691 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:53.691 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:53.691 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:53.691 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:53.692 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:53.692 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:53.692 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:53.692 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:54.702 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:55.270 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:55.270 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:55.271 DV3000 not found!, aborting.
I: 2019-11-03 15:14:58.437 Analog Bridge Version 1.3 Tue Jul 2 12:44:25 UTC 2019
I: 2019-11-03 15:14:58.438 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:58.438 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:58.438 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:58.438
I: 2019-11-03 15:14:58.438 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:58.438 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:58.438 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:58.438
I: 2019-11-03 15:14:58.438 Analog Bridge is starting
M: 2019-11-03 15:14:58.439 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:58.440 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:58.440 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:58.440 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:58.440 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:58.440 Include file asl.ini not found
M: 2019-11-03 15:14:58.440 Setting [] include -> asl.ini
M: 2019-11-03 15:14:58.440 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:58.440 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:58.440 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:58.440 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:58.440 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:58.440 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:58.440 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:58.440 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:58.440 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:58.441 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:58.441 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:58.441 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:58.441 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:58.441 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:58.441 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:58.441 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:58.441 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:58.441 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:58.442 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:58.442 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:58.442 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:59.451 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:15:00.009 Subscriber IDs loaded: 93908
I: 2019-11-03 15:15:00.009 Default extended metadata <YT2CQ>
F: 2019-11-03 15:15:00.009 DV3000 not found!, aborting.
#4
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka yt2dt - Oktobar 29, 2019, 06:36:14 POSLE PODNEJa bih ja poceo sledecim redom
1. proveri da li ti Rasberry pi ima istu IP adresu kao i pre i da li ta IP adresa odgovara podesavanjima u mobilnoj aplikaciji
2. proveri log file na RPi-u da li se raspberry "kaci" i uspesno registruje na DMR mrezu
3. vidi log file sta se desava kada pokusas da se registrujes sa mobilnom aplikacijom
1. proveri da li ti Rasberry pi ima istu IP adresu kao i pre i da li ta IP adresa odgovara podesavanjima u mobilnoj aplikaciji
2. proveri log file na RPi-u da li se raspberry "kaci" i uspesno registruje na DMR mrezu
3. vidi log file sta se desava kada pokusas da se registrujes sa mobilnom aplikacijom
#5
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka YT2CQ - Oktobar 28, 2019, 11:28:54 POSLE PODNEInstalirao sam DVSwitch na RPi i mobilni, prema gore prilozenom uputstvu. I posle instalacije sam uspeo da se povezem na RPi. Ugasio sve i danas kad sam ukljucio ne mogu sa telefonom da se povezem. Gde moze da bude greska???
#6
Ostali uređaji / Odg: Radioddity GD-77
Poslednja poruka Sova - Oktobar 19, 2019, 07:27:12 POSLE PODNENisam korisnik mobilnih telefona ali koliko vidim po video prikazima radi korektno.
Uzgred, Radioddity je uklonio firmware 3.2.4 i CPS 3.1.9 sa zvanicnog sajta!!!
Pojedini su prijavili da dolazi do brisanja dela hardverskog podesavanja i da dolazi do brikovanja uredjaja.
Kod mene radi lepo samo nakon pustanja ptt'a ostaje u predaji jos ~1/2 sekunde.
Uzgred, Radioddity je uklonio firmware 3.2.4 i CPS 3.1.9 sa zvanicnog sajta!!!
Pojedini su prijavili da dolazi do brisanja dela hardverskog podesavanja i da dolazi do brikovanja uredjaja.
Kod mene radi lepo samo nakon pustanja ptt'a ostaje u predaji jos ~1/2 sekunde.
#7
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka YU1WAT - Oktobar 05, 2019, 09:07:19 PRE PODNENeverovatno dobar i kvalitetan audio. Zaista zasluzuje sve pohvale.
#8
Konstruktorska sekcija / Pristup DMR mrezi bez upotrebe...
Poslednja poruka yt2dt - Oktobar 02, 2019, 11:12:46 POSLE PODNEDVSwitch Mobile je aplikacija za Android telefone koja omogucava pristup DMR mrezi bez potrebe koriscenja radio uredjaja.
Zapravo aplikacija omogucava pristup i ostalim digitalnim sistemima kao sto su YSF, P25, D-Star....
Pored same aplikacije potrebno je da imate registrovan DMR id, takodje potrebno je instalirati server komponentu na nekom racunaru.
U prilogu je vrlo detaljno uputstvo kako instalirati i konfigurisati dvswitch na raspberry Pi racunaru.
Mislim da je ovo vrlo interesantan pristup digitalnoj HAM tehnologiji za sve one koje se dvoume da uloze neka sredstva u opremu. Iako je uputstvo napisano za raspberry pi, moguce je instalirati sve i na virtualnoj masini ili nekom starijem PC racunaru.
Za vise informacija pogledajte https://dvswitch.groups.io
Aplikacija https://play.google.com/store/apps/details?id=org.dvswitch
Zapravo aplikacija omogucava pristup i ostalim digitalnim sistemima kao sto su YSF, P25, D-Star....
Pored same aplikacije potrebno je da imate registrovan DMR id, takodje potrebno je instalirati server komponentu na nekom racunaru.
U prilogu je vrlo detaljno uputstvo kako instalirati i konfigurisati dvswitch na raspberry Pi racunaru.
Mislim da je ovo vrlo interesantan pristup digitalnoj HAM tehnologiji za sve one koje se dvoume da uloze neka sredstva u opremu. Iako je uputstvo napisano za raspberry pi, moguce je instalirati sve i na virtualnoj masini ili nekom starijem PC racunaru.
Za vise informacija pogledajte https://dvswitch.groups.io
Aplikacija https://play.google.com/store/apps/details?id=org.dvswitch
#9
Konstruktorska sekcija / Allstar bridge ka DMR i Echoli...
Poslednja poruka yt2dt - Oktobar 02, 2019, 10:57:47 POSLE PODNENedavno sam uspesno postavio alstarlink bridge ka DMR mrezi. Permanentno je linkovan na TG220 i povezan na Echolink.
Ulaz sa echolinka je dostupan svim registrovanim echolink korisnicima ali se na veliku zalost pozivni znak ne prenosi na DMR mrezu ( barem ne, za sada ). Sve stanice se predstavljaju u DMR mrezi sa pozivnim znakom bridge-a u ovom slucaju sa mojim privatnim pozivnim znakom.
Kako ovo nije naislo na topao prijem od strane nase DMR zajednice za sada je Echolink pristup ogranicen na samo moj pozivni znak i znakove par proverenih prijatelja. U slucaju da se ukaze potreba moguce je linkovati bilo koji Echolink nod sa DMR mrezom odnosno sa bilo kojom Talk Grupom. ( mozda u nekoj buducnosti budemo imali zasebnu TG posvecenu samo Echolink mrezi, ovo ce biti vrlo lako izvodljivo jednom kada budemo dobili nas DMR server )
E sad, pojedini ce se zapitati zasto bi neko pravio ovu vrstu bridge-a? Pored onoga moguce je, pa zasto da ne, glavna ideja je da se omoguci most izmedju dve tehnologije za onu situaciju "zlu ne trebalo". U situacijama kada je potrebno "prosiriti" mrezu i prostor pokrivanja, kada DMR mreza ne pokriva podrucje koje je pokriveno analognim repetitorom ili stanicom koja je povezana na Echolink, kada indetifikacija ne igra toliko bitnu ulogu i kada je dobrobit drustva i zajednice veca od sujete pojedinca, sistem stoji na raspolaganju.
Bitno je da se zna da postoji, da radi i da je moguce aktivirati ga na jedan poziv.
Ulaz sa echolinka je dostupan svim registrovanim echolink korisnicima ali se na veliku zalost pozivni znak ne prenosi na DMR mrezu ( barem ne, za sada ). Sve stanice se predstavljaju u DMR mrezi sa pozivnim znakom bridge-a u ovom slucaju sa mojim privatnim pozivnim znakom.
Kako ovo nije naislo na topao prijem od strane nase DMR zajednice za sada je Echolink pristup ogranicen na samo moj pozivni znak i znakove par proverenih prijatelja. U slucaju da se ukaze potreba moguce je linkovati bilo koji Echolink nod sa DMR mrezom odnosno sa bilo kojom Talk Grupom. ( mozda u nekoj buducnosti budemo imali zasebnu TG posvecenu samo Echolink mrezi, ovo ce biti vrlo lako izvodljivo jednom kada budemo dobili nas DMR server )
E sad, pojedini ce se zapitati zasto bi neko pravio ovu vrstu bridge-a? Pored onoga moguce je, pa zasto da ne, glavna ideja je da se omoguci most izmedju dve tehnologije za onu situaciju "zlu ne trebalo". U situacijama kada je potrebno "prosiriti" mrezu i prostor pokrivanja, kada DMR mreza ne pokriva podrucje koje je pokriveno analognim repetitorom ili stanicom koja je povezana na Echolink, kada indetifikacija ne igra toliko bitnu ulogu i kada je dobrobit drustva i zajednice veca od sujete pojedinca, sistem stoji na raspolaganju.
Bitno je da se zna da postoji, da radi i da je moguce aktivirati ga na jedan poziv.
#10
Retevis / Tytera / Odg: Retevis RT3S GPS - kako v...
Poslednja poruka Sova - Oktobar 01, 2019, 11:21:30 POSLE PODNEJeste, trebalo bi da je 0 ispred 21.
Negde se automatski brise 0 a negde se insistira na unosu 3 cifre.
Latitude +/- 90° - Longitude je u okviru +/- 180°.
Negde se automatski brise 0 a negde se insistira na unosu 3 cifre.
Latitude +/- 90° - Longitude je u okviru +/- 180°.