Glavni meni

Skorašnje poruke

#1
Ostali uređaji / AnyTone AT-D878UV
Poslednja poruka YT2CQ - Februar 03, 2020, 08:39:34 POSLE PODNE
Dual-band uredjaj koji podrzava analogni FM, DMR (tier I i II), APRS, DMR Roaming and DPRS.

https://www.va2pv.com/anytone_at-d878uv_dmr_aprs_ht_en
#2
Ostali uređaji / Odg: Radioddity GD-77
Poslednja poruka Sova - Novembar 15, 2019, 12:48:06 PRE PODNE
Izasao novi FW 4.2.6 uz koji dolazi CPS 3.1.9 B ..
Oznacih ga kao B jer nemam podatak da li je isti kao prethodni . .a nemam podatak ni sta je sredjeno od gresaka u ovoj verziji FW.
FW dolazi arhiviran u fascikli sa oznakom 3.2.6 dok je sam fajl sa oznakom 4.2.6 kao i info u uredjaju nakon flesovanja.  ::)
#3
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka YT2CQ - Novembar 03, 2019, 04:16:54 POSLE PODNE
1. IP odgovara i ne menja se.
2.Vidim ga na BrandMeister0u da je online.
3. evo logova i kolko vidim nest sa IP i portovima nisam odradio kako treba:


M: 2019-11-03 15:14:34.691 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:34.691 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:34.691 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:34.691 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:34.691 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:34.691 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:35.701 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:36.274 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:36.275 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:36.275 DV3000 not found!, aborting.
I: 2019-11-03 15:14:39.437 Analog Bridge Version 1.3 Tue Jul  2 12:44:25 UTC 2019
I: 2019-11-03 15:14:39.438 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:39.438 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:39.438 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:39.438
I: 2019-11-03 15:14:39.439 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:39.439 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:39.439 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:39.440
I: 2019-11-03 15:14:39.440 Analog Bridge is starting
M: 2019-11-03 15:14:39.441 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:39.441 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:39.441 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:39.442 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:39.442 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:39.443 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:39.443 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:39.443 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:39.443 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:39.444 Include file asl.ini not found
M: 2019-11-03 15:14:39.444 Setting [] include -> asl.ini
M: 2019-11-03 15:14:39.445 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:39.445 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:39.445 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:39.445 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:39.445 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:39.446 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:39.446 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:39.446 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:39.447 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:39.448 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:39.449 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:39.449 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:39.449 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:39.450 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:39.450 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:39.450 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:39.451 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:39.451 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:39.451 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:39.452 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:39.452 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:39.452 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:40.462 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:41.042 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:41.042 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:41.043 DV3000 not found!, aborting.
I: 2019-11-03 15:14:44.187 Analog Bridge Version 1.3 Tue Jul  2 12:44:25 UTC 2019
I: 2019-11-03 15:14:44.188 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:44.188 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:44.188 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:44.188
I: 2019-11-03 15:14:44.188 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:44.188 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:44.188 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:44.188
I: 2019-11-03 15:14:44.188 Analog Bridge is starting
M: 2019-11-03 15:14:44.189 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:44.189 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:44.190 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:44.190 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:44.190 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:44.190 Include file asl.ini not found
M: 2019-11-03 15:14:44.190 Setting [] include -> asl.ini
M: 2019-11-03 15:14:44.190 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:44.190 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:44.190 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:44.190 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:44.190 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:44.190 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:44.190 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:44.190 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:44.190 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:44.191 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:44.191 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:44.191 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:44.191 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:44.191 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:44.191 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:44.191 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:44.191 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:44.192 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:44.192 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:44.192 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:44.192 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:44.192 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:45.202 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:45.772 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:45.772 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:45.772 DV3000 not found!, aborting.
I: 2019-11-03 15:14:48.938 Analog Bridge Version 1.3 Tue Jul  2 12:44:25 UTC 2019
I: 2019-11-03 15:14:48.938 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:48.938 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:48.938 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:48.938
I: 2019-11-03 15:14:48.938 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:48.938 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:48.939 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:48.939
I: 2019-11-03 15:14:48.939 Analog Bridge is starting
M: 2019-11-03 15:14:48.939 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:48.939 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:48.940 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:48.940 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:48.940 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:48.940 Include file asl.ini not found
M: 2019-11-03 15:14:48.940 Setting [] include -> asl.ini
M: 2019-11-03 15:14:48.940 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:48.940 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:48.940 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:48.940 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:48.940 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:48.941 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:48.941 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:48.941 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:48.941 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:48.941 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:48.941 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:48.941 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:48.942 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:48.942 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:48.942 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:48.942 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:48.942 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:48.942 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:48.942 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:49.952 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:50.535 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:50.535 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:50.535 DV3000 not found!, aborting.
I: 2019-11-03 15:14:53.687 Analog Bridge Version 1.3 Tue Jul  2 12:44:25 UTC 2019
I: 2019-11-03 15:14:53.688 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:53.688 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:53.688 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:53.688
I: 2019-11-03 15:14:53.688 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:53.688 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:53.688 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:53.688
I: 2019-11-03 15:14:53.688 Analog Bridge is starting
M: 2019-11-03 15:14:53.689 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:53.689 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:53.690 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:53.690 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:53.690 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:53.690 Include file asl.ini not found
M: 2019-11-03 15:14:53.690 Setting [] include -> asl.ini
M: 2019-11-03 15:14:53.690 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:53.690 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:53.690 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:53.690 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:53.690 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:53.690 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:53.690 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:53.690 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:53.690 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:53.691 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:53.691 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:53.691 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:53.691 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:53.691 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:53.691 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:53.691 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:53.691 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:53.691 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:53.692 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:53.692 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:53.692 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:53.692 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:54.702 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:14:55.270 Subscriber IDs loaded: 93908
I: 2019-11-03 15:14:55.270 Default extended metadata <YT2CQ>
F: 2019-11-03 15:14:55.271 DV3000 not found!, aborting.
I: 2019-11-03 15:14:58.437 Analog Bridge Version 1.3 Tue Jul  2 12:44:25 UTC 2019
I: 2019-11-03 15:14:58.438 Copyright (C) 2018 DVSwitch, INAD.
I: 2019-11-03 15:14:58.438 Created by Mike N4IRR and Steve N4IRS
I: 2019-11-03 15:14:58.438 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2019-11-03 15:14:58.438
I: 2019-11-03 15:14:58.438 This software is for use on amateur radio networks only,
I: 2019-11-03 15:14:58.438 it is to be used for educational purposes only. Its use on
I: 2019-11-03 15:14:58.438 commercial networks is strictly prohibited.
I: 2019-11-03 15:14:58.438
I: 2019-11-03 15:14:58.438 Analog Bridge is starting
M: 2019-11-03 15:14:58.439 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh dmr.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/analog_bridge.sh dstar.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] NXDN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] P25 -> /opt/Analog_Bridge/analog_bridge.sh p25.ini
M: 2019-11-03 15:14:58.439 Setting [MACROS] YSF -> /opt/Analog_Bridge/analog_bridge.sh ysf.ini
M: 2019-11-03 15:14:58.440 Setting [MACROS] NDXN -> /opt/Analog_Bridge/analog_bridge.sh nxdn.ini
M: 2019-11-03 15:14:58.440 Setting [MACROS] 1234 -> ls -la
M: 2019-11-03 15:14:58.440 Setting [MACROS] 5678 -> echo
M: 2019-11-03 15:14:58.440 Setting [] include -> dvsm.ini
E: 2019-11-03 15:14:58.440 Include file asl.ini not found
M: 2019-11-03 15:14:58.440 Setting [] include -> asl.ini
M: 2019-11-03 15:14:58.440 Setting [GENERAL] logLevel -> 2
M: 2019-11-03 15:14:58.440 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2019-11-03 15:14:58.440 Setting [GENERAL] exportMetadata -> true
M: 2019-11-03 15:14:58.440 Setting [GENERAL] decoderFallBack -> false
M: 2019-11-03 15:14:58.440 Setting [GENERAL] useEmulator -> false
M: 2019-11-03 15:14:58.440 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2019-11-03 15:14:58.440 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2019-11-03 15:14:58.440 Setting [AMBE_AUDIO] txPort -> 31103
M: 2019-11-03 15:14:58.440 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] minTxTimeMS -> 2000
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] gatewayDmrId -> 2200001
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] repeaterID -> 220000105
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] txTg -> 9
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] txTs -> 2
M: 2019-11-03 15:14:58.441 Setting [AMBE_AUDIO] colorCode -> 1
M: 2019-11-03 15:14:58.441 Setting [USRP] address -> 127.0.0.1
M: 2019-11-03 15:14:58.441 Setting [USRP] txPort -> 32001
M: 2019-11-03 15:14:58.441 Setting [USRP] rxPort -> 34001
M: 2019-11-03 15:14:58.441 Setting [USRP] aslAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:58.441 Setting [USRP] agcGain -> 6
M: 2019-11-03 15:14:58.441 Setting [USRP] dmrAudio -> AUDIO_USE_GAIN
M: 2019-11-03 15:14:58.441 Setting [USRP] dmrGain -> 0.35
M: 2019-11-03 15:14:58.441 Setting [DV3000] address -> 127.0.0.1
M: 2019-11-03 15:14:58.441 Setting [DV3000] rxPort -> 2460
I: 2019-11-03 15:14:58.442 Open UDP listener on 127.0.0.1:31100
I: 2019-11-03 15:14:58.442 Open USRP on 127.0.0.1:32001
M: 2019-11-03 15:14:58.442 Connecting to DV3000 hardware......
W: 2019-11-03 15:14:59.451 DV3000 not found at 127.0.0.1:2460
I: 2019-11-03 15:15:00.009 Subscriber IDs loaded: 93908
I: 2019-11-03 15:15:00.009 Default extended metadata <YT2CQ>
F: 2019-11-03 15:15:00.009 DV3000 not found!, aborting.
#4
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka yt2dt - Oktobar 29, 2019, 06:36:14 POSLE PODNE
Ja bih ja poceo sledecim redom

1. proveri da li ti Rasberry pi ima istu IP adresu kao i pre i da li ta IP adresa odgovara podesavanjima u mobilnoj aplikaciji
2. proveri log file na RPi-u da li se raspberry "kaci" i uspesno registruje na DMR mrezu
3. vidi log file sta se desava kada pokusas da se registrujes sa mobilnom aplikacijom
#5
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka YT2CQ - Oktobar 28, 2019, 11:28:54 POSLE PODNE
Instalirao sam DVSwitch na RPi i mobilni, prema gore prilozenom uputstvu. I posle instalacije sam uspeo da se povezem na RPi. Ugasio sve i danas kad sam ukljucio ne mogu sa telefonom da se povezem. Gde moze da bude greska???
#6
Ostali uređaji / Odg: Radioddity GD-77
Poslednja poruka Sova - Oktobar 19, 2019, 07:27:12 POSLE PODNE
Nisam korisnik mobilnih telefona ali koliko vidim po video prikazima radi korektno.

Uzgred, Radioddity je uklonio firmware 3.2.4 i CPS 3.1.9 sa zvanicnog sajta!!!
Pojedini su prijavili da dolazi do brisanja dela hardverskog podesavanja i da dolazi do brikovanja uredjaja.
Kod mene radi lepo samo nakon pustanja ptt'a ostaje u predaji jos ~1/2 sekunde.
#7
Konstruktorska sekcija / Odg: Pristup DMR mrezi bez upo...
Poslednja poruka YU1WAT - Oktobar 05, 2019, 09:07:19 PRE PODNE
Neverovatno dobar i kvalitetan audio. Zaista zasluzuje sve pohvale.
;D :)
#8
Konstruktorska sekcija / Pristup DMR mrezi bez upotrebe...
Poslednja poruka yt2dt - Oktobar 02, 2019, 11:12:46 POSLE PODNE
DVSwitch Mobile je aplikacija za Android telefone koja omogucava pristup DMR mrezi bez potrebe koriscenja radio uredjaja.
Zapravo aplikacija omogucava pristup i ostalim digitalnim sistemima kao sto su YSF, P25, D-Star....

Pored same aplikacije potrebno je da imate registrovan DMR id, takodje potrebno je instalirati server komponentu na nekom racunaru.
U prilogu je vrlo detaljno uputstvo kako instalirati i konfigurisati dvswitch na raspberry Pi racunaru.

Mislim da je ovo vrlo interesantan pristup digitalnoj HAM tehnologiji za sve one koje se dvoume da uloze neka sredstva u opremu. Iako je uputstvo napisano za raspberry pi, moguce je instalirati sve i na virtualnoj masini ili nekom starijem PC racunaru.

Za vise informacija pogledajte https://dvswitch.groups.io
Aplikacija https://play.google.com/store/apps/details?id=org.dvswitch
#9
Konstruktorska sekcija / Allstar bridge ka DMR i Echoli...
Poslednja poruka yt2dt - Oktobar 02, 2019, 10:57:47 POSLE PODNE
Nedavno sam uspesno postavio alstarlink bridge ka DMR mrezi. Permanentno je linkovan na TG220 i povezan na Echolink.

Ulaz sa echolinka je dostupan svim registrovanim echolink korisnicima ali se na veliku zalost pozivni znak ne prenosi na DMR mrezu ( barem ne, za sada ). Sve stanice se predstavljaju u DMR mrezi sa pozivnim znakom bridge-a u ovom slucaju sa mojim privatnim pozivnim znakom.

Kako ovo nije naislo na topao prijem od strane nase DMR zajednice za sada je Echolink pristup ogranicen na samo moj pozivni znak i znakove par proverenih prijatelja. U slucaju da se ukaze potreba moguce je linkovati bilo koji Echolink nod sa DMR mrezom odnosno sa bilo kojom Talk Grupom. ( mozda u nekoj buducnosti budemo imali zasebnu TG posvecenu samo Echolink mrezi, ovo ce biti vrlo lako izvodljivo jednom kada budemo dobili nas DMR server )

E sad, pojedini ce se zapitati zasto bi neko pravio ovu vrstu bridge-a? Pored onoga moguce je, pa zasto da ne, glavna ideja je da se omoguci most izmedju dve tehnologije za onu situaciju "zlu ne trebalo". U situacijama kada je potrebno "prosiriti" mrezu i prostor pokrivanja, kada DMR mreza ne pokriva podrucje koje je pokriveno analognim repetitorom ili stanicom koja je povezana na Echolink, kada indetifikacija ne igra toliko bitnu ulogu i kada je dobrobit drustva i zajednice veca od sujete pojedinca, sistem  stoji na raspolaganju.

Bitno je da se zna da postoji, da radi i da je moguce aktivirati ga na jedan poziv.
#10
Retevis / Tytera / Odg: Retevis RT3S GPS - kako v...
Poslednja poruka Sova - Oktobar 01, 2019, 11:21:30 POSLE PODNE
Jeste, trebalo bi da je 0 ispred 21.
Negde se automatski brise 0 a negde se insistira na unosu 3 cifre.
Latitude +/- 90°  -  Longitude je u okviru +/- 180°.